Product Name:   DVI-5000 MM

The DVI-5000 Multimode Fiber Optic Link is a cost effective transport solution for short runs of high-quality uncompressed DVI signals over one or two fibers. The DVI-5000 features stereo audio and data, and support for DVI video signals up to WQXGA resolution of 2560 x 1600 over one or two fibers. The DVI Single Link version requires only one fiber for resolutions up to WUXGA 1920 x 1200, while the DVI Dual Link version requires two fibers for resolutions up to WQXGA 2560 x 1600. The system also supports stereo audio and bi-directional data for monitor control and uses no compression, with no user adjustments or calibration. The DVI-5000 transports a pixel-for-pixel image that is 100% transparent with no frame dropping, and enables 100% 24-bits for all scan rates with no contouring or bit reduction at a high scan rate. The system also provides a total throughput of up to 10 Gb/s and requires non-proprietary multimode fiber optic cable with a transport distance of up to 1 KM or 3,300 feet. The DVI-5000 transmitter unit supports a loop-through input and the receiver provides two DVI outputs. The system supports EDID from any monitor which is selectable between the loop-through monitor, internal generation on the transmit side or from the monitor on the receiver side.

  


Complete the form below to request solutions from MultiDyne Video & Fiber Optic Systems:


* indicates required field.
Contact Information:




Your privacy is of the utmost importance. Information submitted here is not used for any other purpose than to provide you with product information. Read the full Privacy Policy.